| Frequency Coverage |
10 kHz – 30 MHz |
| Modes |
SSB, CW, AM, FMNB, etc. (Software Defined) |
| Sensitivity |
0.39 uV SSB (S+N)/N= 10 dB |
| Selectivity |
Software Defined (>100 dB Stop Band Attenuation) |
| Image Rejection |
90 dB |
| Input IP3 |
>31 dBm |
| Dynamic Range |
typ. 100 dB (SSB, 2.4 kHz BW) |
| typ |
104 dB (CW, 500 Hz BW) |
| SFDR (Spurious Free Dynamic Range) |
typ. 110 dB |
| Blocking Dynamic Range |
125 dB (CW, 500 Hz BW) |
| MDS (Minimum Detectable Signal) |
-131 dBm (500 Hz BW, Preamp On) |
| |
-124 dBm (2.4 kHz BW, Preamp On) |
| Input ADC Clipping Level |
-4 dBm |
| |
-7 dBm (Preamp On) |
| Attenuators |
0, 10, 20, 30 dB |
| RF Preselection Filters Bank |
LPF Filter (0-1.7 MHz) |
| |
BPF filters (1.7-30 MHz): |
| |
0-1.7, 1.7-2.1, 2.1-3.0, 3.0-4.2, 4.2-6.0, |
| |
6.0-8.4, 8.4-12.0, 12-17, 17-24, 24-32, |
| |
OFF (0- 40 MHz Wide-Band Mode) |
| ADC (Analogue to Digital Converter) |
14 bit, 80 Ms/s with internal dither generator |
| DDC (Digital Down Converter) |
FPGA Based (Xilinx’s Spartan IIIE XC3S250E) |
| PC Interface |
High-speed 480 Mbit/s USB2.0 port |
| Output Sampling Rate |
125 Ks/s, 250 Ks/s, 500 Ks/s |
| Output Bandwidth |
100/200/400 kHz (-130 dB Alias Rejection) |
| Output Signal |
24 bit/sample I-Q pair |
| Power Supply |
+5Vdc +/-5% - 650 mA |
| |
(110/240 V wall adapter included) |
| Cabinet: Aluminium Enclosure |
110 x 36 x 185 mm (W x H x L) |
| Operating Temperature Range |
0-40 C |
| Frequency Accuracy |
+/-1 ppm after calibration |
| |
|
Subscribe